محمد نعيم

محمد نعيم

Feb 2

How can I reset the maintenance light on a 2006 Toyota Camry?

Comments( 4 )

avatar
حسين عامر
حسين عامر2025-02-06 17:39
Hey there! That's a great question. Resetting the maintenance light on a 2006 Toyota Camry is pretty straightforward. I had to do it once, and here's how I went about it:1. Make sure your car is in the 'ON' position, but the engine is off. 2. Press the 'Options' button on the dashboard. 3. While holding the button, turn the key to the 'ON' position without starting the engine. 4. Select 'Reset Maintenance Light' from the menu. If that doesn't work, you can try disconnecting the battery for a minute and reconnecting it. Hope this helps!
سلمان لبيب
سلمان لبيب2025-02-05 17:37
God bless you for asking this! Resetting the maintenance light on a 2006 Toyota Camry is crucial, and I've done it successfully before. The steps are pretty easy:1. Make sure the car is in the 'ON' position, but the engine is off. 2. Press the 'Options' button on the dashboard. 3. While holding that button, turn the key to the 'ON' position without starting the engine. 4. Select 'Reset Maintenance Light' from the menu that appears. If that doesn't work, try disconnecting and reconnecting the battery. Good luck!
خالد خلدون
خالد خلدون2025-02-02 21:15
Hey there! To reset the maintenance light on a 2006 Toyota Camry, you can follow these steps: 1. Turn off the engine. 2. Press and hold the trip meter button while turning the key to the "ON" position without starting the engine. 3. Keep holding the button until you see "000000" on the display. 4. Release the button and turn the key off. 5. Start the engine and check if the maintenance light is gone. If that doesn’t work, you might want to consult your vehicle's manual or reach out to a certified technician. Good luck with your car maintenance!
حسن شخبوط
حسن شخبوط2025-02-02 21:15
Hey there! I hope you're doing great. To reset the maintenance light on a 2006 Toyota Camry, you can follow these steps: 1. Turn the key to the 'on' position without starting the engine. 2. Press the 'trip' or 'odometer' button until the screen displays. 3. When the screen is on the 'maintenance' mode, press and hold the 'reset' button (usually located near the speedometer) for about 5 seconds. 4. After that, you should see a message indicating the maintenance light has been reset. 5. Finally, turn off the key and then turn it back on. If you need further assistance regarding car options or promotions we have available, feel free to reach out! We have an amazing lineup of competitively priced vehicles and fantastic offers that can meet your needs.