Dear esteemed owners of the 2021 Unik model, have you fixed the delayed cold start issue on your cars? Mine is about to go out of warranty and still hasn't been resolved. Any tips?

Congratulations on getting your driver's license and your 2012 manual March! When it comes to maintaining a second-hand car, there are a few key things you should check and possibly replace: 1. **Engine Oil**: It's essential to change the engine oil and oil filter regularly to keep the engine running smoothly. 2. **Brake Fluid**: Check the brake fluid level and consider flushing and replacing it if it's old or contaminated. 3. **Coolant**: Ensure the coolant is at the proper level and in good condition. Replace it if necessary. 4. **Transmission Fluid**: Since your March is manual, check the transmission fluid and change it if it's dirty or hasn't been replaced in a while. 5. **Power Steering Fluid**: If your car has power steering, check the fluid level and condition. 6. **Air Filter**: Inspect the air filter and replace it if it's dirty to keep the engine breathing well. 7. **Spark Plugs**: Check the condition of the spark plugs and replace them if they're worn out. 8. **Tires**: Check tire pressure and tread depth. Rotate the tires if needed and ensure they are in good condition. 9. **Battery**: Check the battery condition and clean any corrosion on the terminals. Regular maintenance is key to keeping your car in good shape. Make sure to follow the maintenance schedule recommended in your vehicle's owner's manual.

Guys, has anyone had to replace their steering gear? I changed mine after just over 5,000 kilometers, and now it's making noise again. Every time I turn, there's a cracking sound! Is this a common issue? The warranty is about to expire, and if it happens again, I'll have to pay out of pocket. It's really frustrating.

When starting a cold car, it should normally take about 2 seconds, but sometimes it takes 5 or 6 seconds. Does anyone else have the same issue? Last time, I replaced a solenoid valve under warranty, but it didn't help. The warranty is about to expire, and I want to fix the problem. I have a 2019 GAC GA6 Luxury Edition.

Hello to all the Jetta owners! I bought a Jetta VA3 Automatic Yuexiang Edition in 2022 (produced in May 2022). I'm not sure if this is the 2021 model or the 2019 model of the Jetta Automatic Yuexiang Edition. I've checked the manual many times but couldn't find out. Could anyone teach me how to determine whether my car is the 2021 model or the 2019 model of the Automatic Yuexiang Edition?

Can version 3.1.9 be upgraded? It seems that versions 3.0.3 and 3.1.2 were pulled back just a few days after their release. Version 3.1.10 was just released a couple of days ago and hasn't been pushed out yet. Currently, version 3.1.9 is being pushed in China. In the U.S., 3.1.9 was pushed out in early July, and it has been available in Europe for about a week. According to U.S. car enthusiasts on forums, some vehicles experienced a flickering issue with the 360-degree surround view in versions 3.0.3 and 3.1.2, where the screen would briefly go black and then light up again. After upgrading to 3.1.9, the issue was significantly alleviated during the first week, with flickering still occurring but only going black for 0.2 seconds and then automatically recovering, not affecting usability. However, the results after one week were not satisfactory, with the 360-degree surround view showing more frequent "camera unavailable" warnings than before, still severely affecting use. Yet, some car owners reported never encountering this issue (even with the problematic 3.x versions), so it might be related to a specific batch of parts or the vehicle's personalized settings. Have car owners in China noticed this issue after upgrading, or are there any other problems?

Did anyone with the 2021 Cayenne experience similar noises? 1. There's a sound similar to backfire when the engine stop-starts cold. 2. There's a noise when braking, even after replacing all four brake pads and discs. It's a screeching sound, quite piercing, like a large truck's brakes. 3. The sunroof screen and sunshade have been making noise since I got the car, and it hasn't been resolved. Anyone with the same issues? Any solutions? Looking for help.

In the 2019 JETOUR X90 Enjoy Edition 6-seater with a 6DCT dry dual-clutch transmission, currently at 120,000 kilometers, an issue has been occurring since around 90,000 kilometers. When starting the car cold, everything is normal during acceleration. However, after driving for about half an hour and the engine warms up, when stopping or waiting at a traffic light and then trying to accelerate again, the car doesn't respond to the throttle. If you press the throttle harder, the engine stalls. When you feel the engine shake while pressing the throttle, if you release the pedal immediately and then press it again, the car can start moving, and everything works normally after that. There are no fault codes detected by the computer, and the spark plugs have been replaced. The engine checks out normal at the 4S shop. I'm seeking advice from experts on how to resolve this issue or if any fellow JETOUR X90 owners have experienced a similar problem and how they got it fixed. Thank you very much for your help!

I've had my Ousheng for a year now, and after 15,000 kilometers, the engine started making a rattling sound like a tractor! I went to the 4S shop and they updated the software, which fixed it. Will this problem happen again in the future? I know a lot of people have faced this issue. If your car hasn't had this problem, please let us know. And for those who have experienced it, please share how you resolved it. 🙏🙏🙏

After the vehicle system update, the reversing camera is lagging. Why hasn't this been fixed yet? The updates seem to be getting worse... Haven't other car owners reported this issue?

In March 2021, I had a 2020 model of the Leading Version. A few days ago, while driving on the highway with the AC on, everything was fine for about an hour. Then, it started getting hotter inside the car. When I checked, the air coming out of the AC vent was disappointingly weak. Usually, setting it to level 1 is more than enough to keep things cool, and sometimes I even have to turn it off for a bit. But this time, even when I turned it up to levels 3 or 4, the cold air was still too weak. Finally, I set it to the maximum, which was barely acceptable. At the same time, the noise from the electric fan became increasingly louder. Later, when I turned it back to levels 1 or 2, there was no airflow at all. Has anyone else experienced a similar issue? How should I resolve it? I would appreciate any valuable suggestions. Thank you.