Tire pressure issue: I mainly didn't understand it. It says if there are fewer than 3 people, set it to 2.3, and if there are more than 4 people, set it to 3.0. Not sure if I understood it correctly.

To connect Bluetooth on a 2014 Acura MDX, follow these steps: 1. **Start the Vehicle**: Make sure your MDX is turned on and in park mode. 2. **Access the Audio Menu**: On the dashboard, press the "Menu" button to bring up the main menu on the display screen. 3. **Select Settings**: Use the control dial to scroll and find the "Settings" option, then press the dial to select. 4. **Bluetooth Setup**: In the settings menu, look for "Bluetooth" or "Bluetooth Setup" and select it. 5. **Pair New Device**: Choose the "Pair New Device" option. Your MDX's Bluetooth system will now be discoverable. 6. **Activate Bluetooth on Your Phone**: Go to your phone's Bluetooth settings and ensure Bluetooth is turned on. Search for new devices. 7. **Select Your MDX**: On your phone, select the Acura MDX from the list of available devices. It might display as "HandsFreeLink" or similar. 8. **Confirm Pairing**: A pairing code may appear on both your phone and the vehicle's display. Make sure they match, and then confirm the pairing on both devices. 9. **Complete the Connection**: Once paired, your phone should connect to the MDX automatically, allowing you to make hands-free calls and play music. Please refer to your vehicle's user manual for any specific instructions or troubleshooting if needed.

To reset the tire pressure warning light, you typically need to follow these steps: 1. **Check Tire Pressure:** Make sure all your tires, including the spare, are inflated to the recommended pressure levels specified in your vehicle's manual. 2. **Drive the Vehicle:** Sometimes, driving the vehicle at a speed above 50 km/h (about 30 mph) for a few minutes can reset the warning light. 3. **Use the Reset Button:** Some vehicles have a TPMS reset button. Turn the ignition to the "on" position without starting the engine, then hold the reset button until the tire pressure light blinks three times. Release the button and start the vehicle. 4. **Consult the Manual:** Refer to your vehicle's manual for specific instructions, as the procedure can vary depending on the make and model. 5. **Professional Assistance:** If the light doesn't turn off, there might be a sensor issue or a need for recalibration, and you should consult a professional mechanic.

Hi everyone, is the electric current noise inside the McLaren GT really loud? I test drove it the other day, and at first, I didn't hear it, but later as I sat in the passenger seat, I seemed to hear a bit. I've seen many people say the noise is quite loud and can't be fixed... I'm a bit OCD, and constant noise would drive me crazy. I'm now hesitating about buying this car.

If you want to add a reversing camera to your 207, you can follow these general steps: 1. **Choose a Compatible Camera**: Make sure the reversing camera is compatible with your Peugeot 207 model. 2. **Purchase Necessary Equipment**: You'll need the camera itself, a compatible monitor, and any necessary wiring or connection kits. 3. **Installation**: - **Mount the Camera**: Usually on the rear license plate area or bumper. - **Run the Wiring**: Connect the camera to the monitor and power source. This often involves routing the wires through the car's interior. - **Connect to Power**: Typically, the camera is powered by the reverse light circuit, so it activates when you shift into reverse. 4. **Testing**: Once installed, test to ensure the camera activates correctly and the image displays on the monitor. If you're not comfortable doing this yourself, it's a good idea to have a professional handle the installation to ensure everything works correctly.

Guys, many people are saying that the GV80 has issues with bumpy roads and uneven surfaces. Is this true? How can we go on road trips then? Could it be a problem with their mode settings or the electromagnetic suspension?

To reset the oil light on an Acura RDX, follow these steps: 1. Turn the ignition to the "ON" position, but don't start the engine. 2. Use the steering wheel buttons to find the "Settings" menu on the display. 3. Navigate to "Maintenance Info" or "Oil Life" using the arrow buttons. 4. Press and hold the "Reset" or "Select/Reset" button until the oil life resets to 100%. Make sure to consult your vehicle's owner's manual for any model-specific instructions.

I just bought a new Highlander less than two years ago, and now I'm thinking about switching to the new Prado. Are there any other owners with the same thought? I'm not sure how this car is, mainly for city and highway driving. I'm torn. 😖

Touareg 3.0, after over 20,000 km, experiencing differential resonance when turning. The dealer isn't resolving it, saying it's a design flaw. The differential is smaller than before. Changing the differential oil can temporarily fix it, but the resonance returns after another 20,000-30,000 km. Do you guys have this resonance issue with your cars?

Didn't they say this car was discontinued? Why are there still a few hundred sales every month, just going steady? Aren't people worried about after-sales issues?

In the past couple of months, I've experienced my car's system crashing twice. The first time, I had to disconnect the car battery and reset to factory settings to get it back to normal. But after about ten days, it happened again. This time, I didn't do anything, and after letting the car sit for an hour, it started working fine again. I'm not sure if it's a hardware or software issue, as I haven't updated the system for quite some time. Has anyone else experienced something similar?