When the brake light of the Volkswagen Touareg is not lit, the first step is to check the brake light switch. If the switch is faulty, all the brake lights will be non-functional. A test can be performed by connecting the brake light switch with a wire; if the brake light turns on, it indicates that the switch is damaged and needs replacement.
The reasons for the Volkswagen Touareg brake light not illuminating mainly include:
1. Check the brake light switch. If this switch is faulty, all brake lights will not illuminate.
2. Check the brake light bulb. Frequent use can cause wear and tear on the bulb, and a broken filament will prevent it from lighting. During inspection, check if the bulb is intact, and if damaged, replace it with a bulb of the same specification.
3. Check the fuse. If both the bulb and switch are normal, check the fuse. Some vehicles share the brake light fuse with other electrical devices, so it’s necessary to check the operation of other devices and replace the corresponding fuse.
4. Check the brake light harness connector. Refer to the wiring diagram to locate the connector in the brake light harness and check for any looseness or rust; repair as necessary.
5. Check the brake light ground wire. If the ground wire is broken or open, the brake lights will not function, so it’s important to reconnect if any issues are found.
.jpg?imageMogr2/format/avif/interlace/1/quality/70/thumbnail/750x)
2 / 15
.jpg?imageMogr2/format/avif/interlace/1/quality/70/thumbnail/750x)
