2016 Elantra Body Kits:2025's Best Style Upgrades Revealed

Kickstarting your upgrade with 2016 elantra body kits is easier with this 2025 guide. Learn expert tips on choosing, installing, and maintaining kits to enhance style, performance, and durability.

How to Choose and Install Your Elantra Body Kit (2025 Edition)

Selecting the right body kit involves understanding both aesthetic appeal and performance benefits. When you explore options for a 2016 elantra body kit, consider these key factors:

1. Material Durability

• ABS Plastic:A cost-effective solution offering decent protection under daily driving conditions.

• Carbon Fiber:A premium, lightweight option engineered for high-performance and reduced mass. It provides excellent resistance against impacts and heat.

• Polyurethane:Known for its flexibility and endurance, this material is well-suited for local road conditions in the UAE, enduring extreme weather and high UV exposure.

2. Compatibility Checks

• Ensure that the body kit aligns with your vehicle’s OEM mounting points to prevent installation issues.

• Measure your wheel arch clearance properly to guarantee the kit fits seamlessly around your tires.

• Check sensor and fog light alignment to avoid interference with onboard electronics.

3. Balancing Style and Function

• Custom Bumpers & Front Lip Spoilers:These features not only enhance the visual appeal but also improve aerodynamic performance, reducing aerodynamic lift at faster speeds.

• Side Skirts and Rear Diffusers:They add a sporty edge while potentially offering jacking points and compatibility with dual exhaust systems.

Step-by-Step Installation Guide

Installing your 2016 elantra body kit can be a rewarding project when following a clear, methodical process:

1. Prep Work (Approximately 2-3 Hours)

• Clean the installation surface with isopropyl alcohol for optimal adhesion.

• Test-fit each component to remove any uncertainty during the actual mounting.

• Securely mark drilling points to ensure precision in later steps.

2. Securing Components (Approximately 4-6 Hours)

• Use high-quality automotive-grade 3M VHB tape along with stainless steel brackets to fix pieces securely.

• Reinforce critical areas with additional silicone sealant along the edges for a water-resistant finish.

3. Post-Installation Care

• Refrain from rigorous car washes for at least 72 hours to allow adhesives to set perfectly.

• Re-check all fasteners after covering roughly 500km to ensure nothing has loosened.

• Schedule a quarterly waxing routine to protect the finish against harmful UV radiation.

2025's Top Body Kit Trends for the 2016 Elantra

Every car owner values products that marry performance and style. In 2025, the latest aerodynamic upgrades for your 2016 elantra body kit focus on both aspects:

Performance-Enhancing Modifications

• Ventilated Hood Designs:These not only provide a visually striking look but also help in reducing engine heat by nearly 18%.

• Integrated LED Daytime Running Lights (DRLs):Modern front bumpers now come with built-in LED DRLs, offering increased safety and a trendy profile.

• Quick-Release Fasteners:Engineered for track days, these allow for faster adjustments and maintenance when performance demands change.

Customization Options

Below is a quick reference table outlining popular body kit packages along with average estimated costs and installation times in AED/SAR:

Maintenance Tips for Long-Lasting Upgrades

Maintaining your body kit is as important as the initial installation. Here are some practical tips:

Cleaning Protocol

• Use a pH-neutral car shampoo that doesn’t damage the paint or kit finish.

• Avoid high-pressure sprays, especially near the edges, that might dislodge or weaken the adhesive bond.

• Reapply a quality plastic restorer every six months to keep surfaces looking fresh and resilient.

Repair and Restoration Solutions

• For minor damages like a cracked ABS panel, a mix of epoxy resin with a fiberglass patch can work wonders in restoring durability.

• In case of a faded finish, using a UV-resistant wrap—such as those from the 3M 1080 series—can rejuvenate the kit's appearance.

• Loose fittings should be addressed immediately using TUV-certified hardware to ensure long-term stability and safety.

Why 2025 Upgrades Matter for Older Models

Upgrading your 2016 elantra body kit in 2025 does more than just refresh your ride’s looks—it can provide exceptional performance benefits:

• Warranty Improvements:Modern materials in the newest body kits offer warranties of up to 5 years compared to the original 2-year coverage.

• Enhanced Efficiency:Aerodynamic improvements may lead to an increase in fuel efficiency by up to 23% through optimized design features.

• Availability and Support:Parts and support for these upgrades have become up to 40% faster in supply within the UAE market compared to several years back.

FAQ

Q1:How do I determine if a particular 2016 elantra body kit is compatible with my car?

It’s essential to start by checking the kit’s design specifications, especially the mounting points and dimensions compared to your car’s OEM details. You should verify clearances around the wheel arches and ensure that all sensors and lights align correctly after installation. Speaking directly with your supplier about compatibility and requesting any available installation guides can be very helpful. This thorough approach saves time and prevents potential issues during the installation process.

Q2:Can the material choices like polyurethane, ABS, or carbon fiber affect the longevity of my body kit?

Absolutely. Polyurethane, ABS, and carbon fiber each have distinct advantages and limitations that impact their durability. Polyurethane tends to provide the best flexibility for UAE road conditions, while ABS is a budget-friendly option. Carbon fiber, meanwhile, offers the lightest and most robust solution, making it ideal for high-performance scenarios. Understanding these differences ensures you choose the material that best fits your driving needs and local environmental factors.

Q3:What are the common installation mistakes to avoid when setting up a 2016 elantra body kit?

Common pitfalls include improper surface preparation, inaccurate drilling, and neglecting to check clearance with wheel arches and sensors. Rushing through preparation can lead to misalignment and may even cause permanent damage to your car’s exterior. It’s wise to take your time with each step, clearly mark where adjustments are needed, and use quality adhesives and fasteners. If in doubt, seeking professional installation could prevent errors and enhance the overall finish of your body kit.

Q4:How frequently should I perform maintenance checks on my newly installed body kit?

Regular maintenance is key to ensuring that your upgraded body kit remains in pristine condition over the long term. Conduct a visual inspection after every 500km, and perform a thorough cleaning at least every quarter. Look out for any signs of damage or loose fittings, and address them promptly using recommended repair solutions. Remember, a proactive approach can significantly extend the functional life of your enhancements.

This article is for reference only, please refer to the latest local laws and regulations.

Read More:

2025 Volkswagen Teramont vs Ford Explorer

Tesla Model 3 Long Range Battery Capacity:Essential Guide

2025 Nissan Xterra Titanium vs Platinum:Trim Comparison