avatar-image

حسين عباد

Feb 26

Hey car enthusiasts, when I put my 4WD on a lift, the front wheels spin but the rear ones don't. After a while, it shows a "4WD Overheat" warning. But when I drive on the road for a bit, the error code disappears.

Comments( 2 )

avatar
عبدالله ذكي
عبدالله ذكي2024-03-01 07:41
The transfer gear is worn.
11
عبدالرحمن ميرزا
عبدالرحمن ميرزا2024-02-29 11:17
I haven't encountered it.
13

fireIconRelated Posts

Top 1 Icon

Do you guys have issues with the passenger airbag showing error codes? Mine was fine in the morning, but in the afternoon, it started showing an error code. Have you experienced this?

Top 1 Icon

Why does the transmission often show a fault code and then disappear on its own shortly after?

Top 1 Icon

What are the issues when the warning lights for these fault codes appear on a 2015 MG GT?

4

The 2014 Zhiya's Blind Spot Detection (BIUS) system showed a fault warning in July this year, but today the fault disappeared and the feature is working again. What could be the reason?

5

Guys, today I tried flooring it in Sport+ mode and heard a rustling sound that lasted about 5 seconds before disappearing. No error codes on the dashboard, and the car drives fine. However, when I parked and shifted to P, there was a continuous electrical noise. The noise disappeared after switching to neutral and back to P. Could there be an issue with the transmission? How should I check it?

6

Is it a problem if my GAC GS5 occasionally shows error codes? How can I fix it?

7

Hey car enthusiasts, when I put my 4WD on a lift, the front wheels spin but the rear ones don't. After a while, it shows a "4WD Overheat" warning. But when I drive on the road for a bit, the error code disappears.

8

Hey guys, my car is showing error code P048013, which is about fan 1 control circuit, general electrical fault, open circuit. Has anyone encountered this error code before? Thanks.

9

What's the real-world range of this 4WD version on city roads if I don't deliberately control the throttle?

10

I have a Haima S5 with an automatic transmission, and occasionally the transmission warning light turns on. But when I press the brake, it goes off! When I try to read the error code, nothing shows up. What could be the reason?