My BYD Seal has traveled 40,000 kilometers, and the inner edges of the two rear tires are worn 2mm more than the outer edges. The dealership said I need to do an alignment, which costs 300 yuan. It feels expensive, so I didn't do it. Do any of you have this kind of wear issue?

I've been using the 2017 MDX for over a year, and the front tires are wearing out unevenly. After rotating the rear tires to the front and doing an alignment, the newly replaced tires are again showing severe uneven wear. Have any other car owners experienced this situation? Looking for advice.

The Vellfire has been driven over 40,000 kilometers, and there's a lot of noise coming from the rear tires. Upon inspection, the inner tires are worn, and both tires are the same. What could be causing this?

When buying a 2008 Yaris, here are some areas you should check: 1. **Exterior and Interior Condition**: Inspect for any signs of rust, dents, or scratches on the exterior. Check the interior for wear and tear, especially the seats, dashboard, and electronics. 2. **Engine and Transmission**: Listen for any unusual noises from the engine and ensure that the transmission shifts smoothly. Look for any leaks or corrosion. 3. **Brakes and Tires**: Check the condition of the brakes and ensure the tires have sufficient tread and are evenly worn. 4. **Suspension and Steering**: Test the suspension and steering for any unusual noises or stiffness. 5. **Electrical Systems**: Make sure all lights, indicators, and other electrical components are functioning properly. 6. **Service History**: Review the vehicle’s service history to ensure it has been well-maintained. After purchasing the car, here are some maintenance tips: 1. **Oil Change**: Start with an oil and oil filter change if it’s not recently done. 2. **Replace Air Filters**: Check and replace both the engine and cabin air filters if necessary. 3. **Check Fluids**: Ensure that all fluids (coolant, brake fluid, transmission fluid, etc.) are topped up and in good condition. 4. **Inspect Belts and Hoses**: Look for any signs of wear and replace if needed. 5. **Battery Check**: Ensure the battery is in good condition and clean the terminals if there is any corrosion. 6. **Spark Plugs**: Consider replacing the spark plugs if they haven’t been changed recently. 7. **Tire Maintenance**: Rotate the tires and check wheel alignment. By taking these steps, you’ll help ensure that your Yaris remains reliable and performs well.

Is it necessary to do wheel alignment after picking up the car? I did some research and found that issues with the camber angle can lead to inner tire wear. Not sure if the new model has this problem?

Do you have a link for the window glass inner seal strip?

My Kodiaq's rear inner tires are wearing unevenly and noticeably. The repair shop says the lower arm needs to be replaced because it's not an adjustable one, so four-wheel alignment can't be done. Does anyone know if this is correct?

My Kodiaq's rear tire is wearing unevenly, with noticeable wear on the inner side. The repair shop says I need to replace the lower arm because it can't be adjusted, and then do a four-wheel alignment. Is this the case?

Has anyone done a wheel alignment? My City has uneven wear on the left rear tire and slightly pulls to one side. I've heard that the City’s rear wheels are non-adjustable and you can only add shims during alignment. Is this safe? Also, is it necessary to do a wheel alignment since the tires are quite cheap? 🤦‍♂️