How to check tire pressure on the dashboard of the Honda Zhi Zai?

How to Check Tire Pressure on the Dashboard

To check the tire pressure for Honda Zhiyang and Qoros, first press the 'SET' button and check the tire pressure of all four tires to ensure they are within the normal range before starting the car.

Then, lightly touch the control circuit of the tire pressure monitoring device until you hear a 'ding'.

The monitoring device will then start operating. It analyzes tire rotation speed or uses sensors installed in the tires to automatically monitor various conditions in real-time, providing effective safety protection for driving.

The method to check tire pressure on the dashboard is as follows: The compass tire pressure gauge has inner and outer circles, with meanings depending on the unit label.

'kg/cm2' represents kilograms of force, while 'PSI' represents pressure units, which are actually equivalent.

Both low and high tire pressure can severely damage tire lifespan, so drivers need to maintain tire pressure within a normal range at all times.

Common tire pressure gauges include compass-type, digital display, and alarm-type gauges. The digital and alarm types will directly display the standard tire pressure figures and sound an alarm when the pressure is abnormal.

The most commonly used is the compass tire pressure gauge; inserting the gauge into the tire valve core can detect tire pressure.

How to Properly Use Each Gear of a Manual Transmission

To properly use each gear of a manual transmission vehicle and the speed for each gear, first gear is the starting gear used for vehicle start-up. Its gear ratio performance is basically the same as reverse gear, so it is not suitable for prolonged high-speed operation. Once the vehicle gains inertia, you can switch to second gear. Second gear is suitable for navigating complex terrains and dealing with complicated situations, such as sharp turns without special obstacles, densely populated busy roads, steep gradients, and uneven surfaces. Third gear is a transition gear mainly used for low-speed driving on urban roads. Depending on the actual situation, you can flexibly accelerate to fourth gear or decelerate to second gear. Fourth gear is the driving gear suitable for prolonged high-speed and economical driving. In most vehicles, the most economical speed is often found in the low-speed range of fourth gear. Fifth gear is the high-speed gear, primarily used for long-distance driving on highways. This is the response from Pacific Automotive regarding 'How to Properly Use Each Gear of a Manual Transmission Vehicle and the Speed for Each Gear,' and we hope it helps you.